Foam Stopper 22-27 — Industrial Defoamer / Foam Control Additive

Aluminum-safe powdered parts washer detergent for hot jet, closed cabinet, and spray systems. Cleans aluminum, brass, copper, and other soft metals without the etching or discoloration that caustic compounds cause. 100% active, with a rust inhibitor built in to protect both parts and the cabinet from flash rusting. Low-foaming for recirculating systems. No caustic soda, no nitrite, and no California Prop 65 warning.

Directions: Dilute 1–3%. Add slowly while the machine is running, then bring to operating temperature.

Available sizes:

●      40 lb pail

●      100 lb fiber drum

●      500 lb open-top drum

A 100% active powdered compound formulated for cleaning aluminum transmissions and other soft metals — aluminum, copper, magnesium — in hot jet spray systems, without the dulling or damage other products can cause. Balanced alkaline builders and foam inhibitors, with rust protection for the cabinet.

Directions: For closed cabinet hot jet washers, mix 4 to 8 ounces per gallon, or as little as 2 ounces for economy. Add slowly while the machine is running.

Available sizes:

• 40 lb pail

• 100 lb fiber drum

• 500 lb open-top drum

A hot tank cleaning and stripping compound for ferrous metals, built on a heavy caustic base for engine blocks, heads, and cast iron components in heated soak tanks. Strips grease, rust, carbon, and paint while protecting metal from flash rusting.

Directions: Designed to be added to cold water; turn on the heater after adding. Add slowly while the machine is running.

Available sizes:

• 40 lb pail

• 100 lb fiber drum

• 500 lb open-top drum

Warning: Do not use on aluminum or soft metals.

A concentrated defoaming compound designed to out-perform ordinary anti-foam products. Use Foam Stopper 22-27 wherever foam is a problem — from fats, synthetic oils, detergent soaps, and paints. Knocks down and holds back foam in wash tanks, recovery systems, and process water.

Directions: Add in small amounts to the foaming system until foam is controlled; increase slightly as needed.

Available sizes:

• Case of gallons (4x1)

Z- VIB 200 is designed to be used in ultrasonic and immersion washers.  This highly concentrated formula cleans carburetors and engine parts, stainless steel hoses etc.

☎ CALL FOR PRICING

Use Z-Three Phase wherever rust is a problem. Great for cast iron and steel. For best results, use Z-Three Phase in a soak tank, closed cabinet, or dip-type operation. Z-Three Phase may be dipped, brushed, or wiped on to prevent rust. May last up to two years depending on environment.

☎ CALL FOR PRICING